Climbing the Mast
I discovered last year, when replacing the jib, that the jib halyard was starting to look worn. But the line itself was much longer than I needed, and the rest of it, beyond that top foot, was in really great shape. So this year I asked a friend of mine if he could reweave the eye back in for me. He agreed.
So I attached an extra line to the halyard I wanted to pull down and pulled the new line into place as I pulled the old one down. That way, when the old one was repaired, I only needed to reverse the process to get the old one back into place.
Well, my friend fixed the old one over a weekend, and the next weekend, Erik and I went down to run the halyard back up. It was quite breezy that day, so we decided to wait. We wouldn’t be able to reattach the furler jib, so it seemed a waste of time to mess with the halyard, so I tied the line back up, re-stuffed the jib into the cabin (we’d taken it home and I’d cleaned it off while it was down), and headed home.
So, I must not have tied the line off well. Because the following weekend, when we came by to try again, the line I’d used as a placeholder was neatly coiled on my deck.
So back to my friend I go. He happens to be the scoutmaster for a Sea Scout troop, so I asked if he thought one of his scouts might be willing to climb the mast and replace the halyard. He said he thought so.
So today, I met Liza (the Sea Scout) at the boat with Mike (the scoutmaster). Liza donned a climbing harness that Mike had brought along, rather than the bos’n’s chair I had borrowed. We moved the jib pulley back so it was next to the jib winch and hooked Liza up to the main halyard. We pulled the halyard through the pulley and into the winch and pulled her up the mast.
Liza up the mast
We had sent Liza up with a straightened coat hanger to use as a guide, the halyard, and some painter’s tape, to attach the halyard to the coat hanger.
Liza first had trouble trying to get the coat hanger through. It was apparently not a straight shot. She was doing this from the rear of the mast and finally came around to the front and figured out how it needed to go. She tried again and got it through, after a few more attempts.
Next problem was the tape. The painter’s tape wasn’t strong enough to hold the halyard on to the coat hanger. So we passed her up some duct tape to use instead. This worked, but now she was having trouble pulling the coat hanger back through. The coat hanger had been straightened out. But one of the spirals in it was hanging inside the pulley.
At this point, Liza had been up the mast for an hour, so Mike asked her to come backd own and we’d try again another time.
So now my conundrum. Do I ask Liza or another of the troop to try this again? Do I get one of my experienced buddies, whose more heavy, but would know what they were doing to do it? Do I attempt to do it myself? Or doI pay to have someone at the marina do it?
We’ll see. No hurry. I don’t need to have it done until April when racing season starts.